Specifications for the Mixers Australia MA 7.6m Midweight Hydraulic Transit Mixer.
Please note: Mixers Australia barrels are manufactured in our Brisbane workshop and are made from Australian made K1042 steel. We do not use imported steels nor do we reuse old barrel parts to make a new barrel.
a SKIN 4mm alloy K1042.
b MID SECTION 4mm alloy K1042
c FINS 4mm alloy K1042 mixing chamber
4mm alloy K1042 end cone
d FLARES 6mm 250 grade steel.
e DISHED END 10mm 350 grade steel.
7.6m³ mixers also have an 8mm internal wear dish
f MANHOLES Two (2) with ID to suit WH&S standards.
g BOWL GUARD Fitted to all mixers for operator safety.
h GEARBOX FLANGE
RING 24 x high tensile M16 10.9 bolts replace older type 12 bolt flange. Reduces risk of bolts working loose or breaking. (Please note : 24 bolts only to be used with latest ZF Gearbox).
i BOWL ANGLE 7.6m³ = 13.8 deg.
j TRUNNION RING 75×40 FMS fully linished to achieve smooth operation.
a CHASSIS RAILS 76x76x6mm
b FRONT PEDESTAL 4mm 250 grade steel fully welded inside and out including gussets on inside. Gearbox mounting plates on pedestal machined to tolerance with gearbox. Pedestal fully welded to chassis including angle cross member.
c REAR A-FRAME 4mm 250 grade one (1) piece folded section, a-frame top support plate 10mm, two (2) full internal 5mm baffles and two (2) 10mm gussets under top support plate. Trunnion roller brackets fabricated from 12mm 350 grade material including two (2) gussets per bracket. Bent arm box mounting supported by two (2) internal gussets
d BANANA CHUTE 3mm 250 grade steel.
e SQUARE LOADING HOPPER 3mm 250 grade steel with height adjustable hopper channel.
No. 1 – 3mm 250 grade steel
Nos. 2, 3 & 4 – RHS frame and 6mm ultra high molecular weight polyurethane inserts.
g CHUTE JACK Chute Jack or Hydraulic Ram
h CHUTE LOCK Brake shoe
i TRUNNION ROLLERS Steel with grease nipples fitted to outside of a-frame for ease in greasing.
j CHUTE RACK Bolts on double chute rack.
k GUARDS Pressed aluminium or Plastic.
l LADDER & PLATFORM
Mixers Australia pull down aluminium ladder meeting
Australian Standards AS 1892.1–1996 and AS 4324.1-1995.
m MIXER TRAY 6mm ultra high molecular weight polyethylene 1000 grade.
a GEARBOX 7.6m³ – Bonfiglioli 577 – 131/1 ratio.
b PUMP Rexroth 71 cc Manual or Electric.
c MOTOR Rexroth 56 cc.
ALL MADE TO SAE SPECIFICATION.
5.4 1¼” suction 600 PSI burst pressure.
100R9R 1” pressure 16800 PSI burst pressure.
Both pressure hoses tagged for ease of identification and warranty traceability. 100R6 ¾” return PSI burst.
e JACK SHAFT Heavy duty – 1410 series.
a WATER TANK
Pressurised 200 litre aluminium complete with pressure relief valve, regulator, check valve and low air safety valve.
b WATER GUN Top and bottom.
c CONTROLS Cables or Remote
d FOLD DOWN STEP Opt
e SLUMP GAUGE Opt
f WATER METER Opt
SANDBLASTING AND PAINTING
Class 2.5 and contaminants removed.
b FIRST COAT:
7.6m³ = Approximately 3100kgs including oil and 200ltrs of water.
Each mixer is individually built to suit the truck, therefore there can be slight weight variations.