Specifications for the Mixers Australia MA 6.4 Midweight Hydraulic Transit Mixer
Please note: Mixers Australia barrels are manufactured in our Brisbane workshop and are made from Australian made K1042 steel. We do not use imported steels nor do we reuse old barrel parts to make a new barrel.
BOWL
a SKIN 4mm alloy K1042.
b MID SECTION 4mm alloy K1042
c FINS 4mm alloy K1042 mixing chamber
4mm alloy K1042 end cone
d FLARES
6mm 250 grade steel.
e DISHED END 10mm 350 grade steel.
f MANHOLES
Two (2) with ID to suit WH&S standards.
g BOWL GUARD Fitted to all mixers for operator safety.
h GEARBOX
FLANGE
RING
24 x high tensile M16 10.9 bolts replace older type 12 bolt flange. Reduces risk of bolts working loose or breaking. (Please note : 24 bolts only to be used with latest ZF Gearbox).
i BOWL ANGLE 6.4 mtr = 15 deg.
j TRUNNION RING 75×40 FMS fully linished to achieve smooth operation.
FRAME
a CHASSIS RAILS
76x76x6mm
b FRONT PEDESTAL
4mm 250 grade steel fully welded inside and out including gussets on inside. Gearbox mounting plates on pedestal machined to tolerance with gearbox. Pedestal fully welded to chassis including angle cross member.
c REAR A-FRAME 4mm 250 grade one (1) piece folded section, a-frame top support plate 10mm, two (2) full internal 5mm baffles and two (2) 10mm gussets under top support plate. Trunnion roller brackets fabricated from 12mm 350 grade material including two (2) gussets per bracket. Bent arm box mounting supported by two (2) internal gussets.
d BANANA CHUTE 3mm 250 grade steel.
e LOADING HOPPER 5mm 250 grade steel with height adjustable hopper channel.
f CHUTES No. 1 – 3mm 250 grade steel
Nos. 2, 3 & 4 – RHS frame and 6mm ultra high molecular weight polyurethane inserts.
g CHUTE JACK Chute Jack or Hydraulic Ram
h CHUTE LOCK Brake Shoe
i TRUNNION ROLLERS Steel with grease nipples fitted to outside of a-frame for ease in greasing.
j CHUTE RACK
Bolts on double chute rack.
k GUARDS Pressed aluminium or Plastic
l LADDER & PLATFORM
Mixers Australia pull down aluminium ladder meeting
Australian Standards AS 1892.1–1996 and AS
4324.1-1995.
m MIXER TRAY 6mm ultra high molecular weight polyethylene 1000 grade .
HYDRAULICS
a GEARBOX
6.4 = Bonfiglioli 575 – 141/1 ratio.
b PUMP
Rexroth 71 cc Manual or Electric
c MOTOR
Rexroth 56 cc.
d HOSES ALL MADE TO SAE SPECIFICATION.
5.4 1¼” suction 600 PSI burst pressure.
100R9R 1” pressure 16800 PSI burst pressure.
Both pressure hoses tagged for ease of identification and warranty traceability. 100R6 ¾” return PSI burst.
e JACK SHAFT Heavy duty – 1410 series with Spilt Clamp.
MISCELLANEOUS
a WATER TANK
Pressurised 200 litre aluminium complete with pressure relief valve, regulator, check valve and low air safety valve.
b WATER GUN
Top and bottom.
c CONTROLS Cables or Remote.
d FOLD DOWN STEP
Opt
e SLUMP GAUGE
Opt
f WATER METER
Opt
SANDBLASTING AND PAINTING
a SANDBLASTING Class 2.5 and contaminants removed.
b FIRST COAT:
TOP COAT:
Zincanode 402
One colour.
WEIGHT
a WEIGHT
Approximately (6.4) = 2950kg including oil and 200ltrs of water.Each mixer is individually built to suit the truck, therefore there can be slight weight variations.
